Buying toners here at our great counter (Philippines) cost more than the price of the printer. Below is how we do to minimize buying of new toners for this printer. Yes, we sometimes use remanufactured or compatible one, but not entirely. Please always use the original one. Rema (remanufacture) and/or compatible toners might destroy your printer mechanism since it's not genuinely made by the printer supplier base on my experience.
Step 1 - Turn off your printer.
Step 2 - Open the front cover and make sure it remains that way thorough the whole procedures.
Step 3 - Hold the go button while turning on your printer, all LEDs turn on and the Ready LED will turn off.
Step 4 - When the Ready LED turns off, release the GO button. All LEDs will turn off.
Step 5 - Press the GO button 2 times (Toner, Drum, and Error LEDs turn on.)
Step 6 - Press the GO button 7 times. All LEDs turn off and then the error LED will turn on.
Step 7 - When the error LED stays on, close the front cover. The error LED will turn off and the ready LED will briefly.
Step 8 - Verify the ready LED is on steady and the toner LED is off. Once you done, you can now resume doing your print jobs.
No comments:
Post a Comment